guide to make boat

Nick Kulenkampff, of Cape Town, bought plans from us in November 2013 for the Cape Cutter 19, to be built in lapstrake plywood. I only received one question from him and that was on choice of plywood for the build. A few days ago I received another email from him, with launch photos attached. He launched his boat, named "Mimi", at Royal Cape Yacht Club, in February.

In his email, Nick said "thank you for a beautiful design and also for a set of plans that were spot on. I thoroughly enjoyed the entire process." From the photos it appears that he made a pretty good job of the build, which was also quicker than most at about 15 months.

This boat is available in GRP from Cape Cutter Yachts in UK. It is the smaller sister to our popular Cape Henry 21 design.

Here are some of Nick's build photos, with explanations

Making bulkheads. These are cut from full-size Mylar patterns, included in the plans.

Transom, laminated from multiple layers of plywood.

Bulkheads and transom set up on building stocks.

Bottom skin going on. Plenty of clamps needed.

Bilge panel gong on. Keel deadwood and wood bilge keels fitted. This bilge keel is to protect the hull when aground, serving purely as a support to keep the hull skin clear of pebbles.

Forward bottom panel. Fitting this panel is the most difficult part of the build, due to the amount of twist in the panel. The twist is what forms the fine bow for good performance.

Hull epoxy-coated, primed and ready for paint.

Building the cockpit. Nick's work is very neat.

Interior, looking forward, built  before fitting the deck.

Interior, looking aft. Painting in progress.

Deck stringers glued into pre-cut slots

Painted and brightwork being done. Almost ready to get wet.

This view shows why these little boats are so quick. That fine bow works vvery well.

Launch day. The yellow boat below the bow is "Black Cat", the Didi 38 that I built.

Afloat and waiting for her rig to be set up.

Thank you, Nick, for the set of photos. She looks good and I am sure you will have many good times sailing her.

To see more of this and out other designs, visit http://dixdesign.com/.

The Cape Cutter 19 was commissioned by Nick and Lyndsay Voorhoeve as a GRP trailer-sailer, styled after the traditional working craft of UK. It was first built in South Africa, then the company was sold to Honnor Marine, who have built them in UK since 2003. To date more than 125 GRP boats have been built and we have also sold plans for nearly 70 of them, to be built from plywood.

These little boats have proven to be very capable little cruisers, with a surprising turn of speed. They have won the modern gaffer division of the Round the Island Race (around the Isle of Wight) a number of times. I designed the CC19 to handle the boisterous seas and winds found around the Cape of Good Hope, so it has proven quite at home in the sometimes rough conditions around the Solent.

Most are used for family cruising but some have made interesting passages. Top of the list must be the voyage that Jo Sinfield made on "Bandoola". She was built for him in Cape Town in 2002, then shipped to Myanmar (previously Burma), 1000 miles up the Irrawaddy River. Jo sailed her down the Irrawaddy River to the Bay of Bengal, across the Andaman Sea to Thailand then to Singapore.

Jo Sinfield and "Bandoola" sailing the Irrawaddy River in Myanmar.

Another remarkable journey was the fund-raising voyage that Mike Brooke made with his CC19 "Theo's Future", to raise funds for research and treatment of a congenital eye disease. Mike is an ex Royal Marine and highly experienced dinghy sailor. He circumnavigated England in June to September 2008, with a variety of friends and family crewing for him on various legs. He raised more than his target and was able to buy important hi-tech equipment for treatment of the condition. Theo is Mike's nephew, who was born healthy but lost his sight to the condition within months. Mike continues to raise funds by selling his book about the voyage, "Fight for Sight on Theo's Future - A Voyage of Hope & Endeavour". If you want to read his story and support this very worthwhile cause, you can buy his book at http://www.theosfuture.org/.

Mike Brooke sailing "Theo's Future"

I have just read of another voyage by a CC19. This was a circumnavigation of UK, made by David Farquhar on CC19 #11, "Pipistrelle". David didn't intend to circumnavigate, he set off for a few days of sailing to see how his boat went, then just kept going. He harbour-hopped and spread it over a three-year period before arriving back at his starting point. David is now part-way through doing the same again and estimates that to date he has sailed about 4000 miles on his little ship.

David Farquhar and crew Fiona on CC19 Pipistrelle

These very capable little boats have wonderful character and are well-loved by their owners. It will be interesting to see where else their owners may take them (or be taken by them).

To see more of this and our other designs, please visit http://dixdesign.com/.