guide to make boat

This time last week we were in Connecticut,  participating in the 24th annual Wooden Boat Show at Mystic Seaport. We drove there with two boats in tow, the Paper Jet prototype that we have exhibited the past few years, and the prototype of our new Inlet Runner 16 garvey powerboat design. Sorry, no hyperlink for that one yet, I am still working on the design package.

Paper Jet and Inlet Runner 16 nested for long-distance travels.

The Inlet Runner was built by Kevin Agee and exhibited by him in the "I Built it Myself" section of the show. As a first-time amateur boatbuilder with little woodworking experience, he made such a great job of his project that he took 2nd place in the amateur-built powerboat division, winning the Honourable Mention Award. Congratulations to Kevin for a job well done. I helped out at the end of the project with a bit of sanding but Kevin did everything else himself.

Inlet Runner in the "I Built it Myself" section of the Wooden Boat Show.

The Inlet Runner has my interpretation of a classic garvey hull.

 The Inlet Runner received a lot of interest and we have a few builders waiting for completion of the plans. Also a few requests for both bigger and smaller versions of the same concept. Watch for those on this blog in the next year or two but they must wait in line behind other projects that are currently in progress.

This boat has side seats aft and foredeck with lockers under for stowage, icebox, bait well etc. It also has a self-draining wet deck that can be left clear for fishing space or fitted with a swivel seat for flat-water fishing. We will also offer a Jonboat format with transverse seats and a centre console format on the wet deck.

Deck layout of Inlet Runner, set up for flat water fishing.

Overall, a successful show for us. Thank you Wooden Boat Publications, for organising this show for the benefit of lovers of wooden boats of all types. I look forward to being there again in 2016.

To see our full range of designs, please visit http://dixdesign.com or, for the mobile viewers, http://dixdesign.com/mobile

I wrote in January about the 16ft plywood garvey being built by Kevin Agee. Kevin is progressing nicely and benefitting from the very welcome spring that has finally arrived and eased out the rather brutal winter. Now it is easier to do woodwork and epoxy cures much faster, so work progresses more quickly. Epoxy coatings in the sealed spaces are being completed and this weekend the deck will be glued on.

Hull skin completed, interior details being fitted.

Supports for battery box and fuel tank.

Deck stringers going in, test fitting of fuel tank.

Bottom runners serve as stringers and bottom protection.

Dry-fitting deck, ahead of final installation this weekend.

Kevin Agee is doing a nice job of his project and will display it in the "I Built It Myself" section of the Wooden Boat Show at Mystic Seaport at the end of June. If you want to see this boat, that will be the place to do it.

Plans are not yet ready for selling but should be in a month or two. We will offer it as plans and instructions, with options of full-size patterns or a pre-cut plywood kit.

To see our designs for your next amateur project, please visit our website at http://dixdesign.com .

I have been working intermittently on a new 16ft design for awhile, the start of a range of small powerboats for protected water use. The design is still a way off being complete but the prototype is already being built by Kevin Agee in Hampton, Virginia and is progressing well.

I am using a garvey-type hull that can be easily built from either plywood or aluminium. It has Vee'd sections forward to soften the ride in a bit of a chop, with twisted bottom panels that run out to a shallow V at the transom for easy planing.

The version that Kevin is building has a self-draining wet deck with swivel seats on bases bolted to the deck. It has integral floodable tanks under the deck to hold bait and catch.There will also be a "sit-inside" version with bench seats, with the tanks under the seats.

Kevin is building from okoume plywood, cut from full-size paper patterns that we have supplied. When the design is complete then we will also offer plywood kits, cut by CNC machine. The photos below show the basics of construction as far as it has gone to date.

Bottom panels with slots for bulkhead tabs

Glass-taping joints in panels.

Bottom panels stitched together & bulkheads set up

Sides added and stitched to bottom

Foredeck added and stitched in.

Turned over and laid flat, ready to epoxy seams.